Semenuga V.V., Akopova G.S., Kapitonov A.N., Tretyakov V.A., Balashov M.L., Teterevlev R.V., Kayukova N.A.
NGV caravan "Blue corridor - 2010"
Òhe outcome of the rally, which took place on 17-24 September 2010.
Akhmetov Sh.G.
The Ryazan region: problems and use prospects of gas fuel
In the article the Minister of Transport Highway, Ryazan region. on the experiences of compressed natural gas transport in the region.
Mirzoev G.K., Ivlev S.N.
JSC AVTOVAZ: Future Developments and Industrialization for CNG Vehicles
An article about the plans of AVTOVAZ in the near future, where production is planned car running on methane. Tells about the first-born in this direction the car LADA Priora CNG.
Maljuga A.G., Hafizov R.H.
OJSC KAMAZ stands for solving of environmental problems in Russian big cities
OJSC KAMAZ, the largest manufacturer of heavy vehicles in Russia, has been concerned with environmental problems for a long time. This interest has led us to development of new products which conform to the strictest legal requirements and also to actual demands of our customers and their work environment. We believe that compressed gas vehicles are the right solution for problem of current demands for environmentally friendly city vehicles and buses.
This article gives brief description of extension steps of model range of KAMAZ gas engines.
Keywords: compressed natural gas, gas fuel, gas engines, ecology.
Batyrshyn R.R., Shport Y.A., Gatijatov A.A.
OJSC "KAMAZ" Gas Cylinder Equipment Maintenance Centre
Gas cylinder equipment maintenance organization technique is presented in this article. The developed standard of the gas cylinder equipment maintenance centre gives opportunity to create the tendency on gas cylinder vehicles warranty and maintenance services on the basis of existing maintenance companies.
Keywords: compressed natural gas (CNG), the gas automobile.
Abdullin R.H.
State of gasification of motor vehicles in Gazprom Transgaz Kazan
On experience for the conversion of industry and third-party vehicle to gas at Gazprom Transgaz Kazan.
Getman V.V.
Reflections on the rally of the Blue Corridor - 2010, and prospects for the park NGV technology
Opinion Party rally.
GasSUF-2010 - Equipment and technologies for gas supply and efficient use of gas
On the outcome of the 8 th International Specialized Exhibition GasSUF-2010, which was held 14-17 September 2010 in Moscow
Prikhodko V.M.
MADI: Formation and development marks
Article MADI Rector tells the story of this institution of higher education.
Khachiyan A.S., Shishlov I.G., Vakulenko A.V., Karpov D.M.
Research and development of dual fuel engine with qualitative regulation
Paper is dedicated to research and development of dual fuel (natural gas - diesel fuel) engine. To inject minimized diesel fuel portion under high pressure, hence fine atomized accumulator type injection system is used.
Natural gas is metered outside of cylinders with the help of electronically controlled valves. In turned out that with the system described shortly it is possible to run the engine from minimum idle speed to high torque with substitution diesel fuel by natural gas 86% (at minimum idle) up to 95 % (at high torque) diesel fuel.
Keywords: bi-fuel engine, natural gas, diesel fuel, accumulator type injection system.
Panov Y.V., Potchukaev M.I., Nazarov M.A., Molchaninov V.I.
Onboard electronic control system of the engine for routing rationing
The article describes the method of an estimation of fuel consumption by LiAZ buses, equipped with Cummins engines. The estimation method based on computer analysis of information from the engine control module (ECM). The method has compared with residual CNG pressure consumption method.
Keywords: Natural gas consumption, ECM, natural gas, buses, computer, comparison of methods of the compressed natural gas consumption estimation, residual pressure.
Luksho V.A.
Diesel engine converting into the gas engine with a controlled thermodynamic cycle
The mode of creation of a gas engine on the basis of the diesel engine without change of a geometrical compression ratio is considered. Results of settlement researches of indicators of working processes of the engines working on different thermodynamic cycles are submitted. It is shown, that it is possible to receive a gas engine working with an controlled thermodynamic cycle (CTDC) with effective indicators, not worse than the diesel engine.
Keywords: gas engine, Miller's cycle, controlled thermodynamic cycle, fuel efficiency.
Shishkov V.A.
Direct injection of gas fuel in the chamber of combustion the engine of internal combustion with spark ignition
The opportunities of realization direct injection of gas fuel in the chamber of combustion the engine of internal combustion with spark ignition with an electronic control system are considered. The recommendations for system and algorithm of management of submission of gas fuel with direct injection and management the engine of internal combustion on various modes of his work are given. The advantages and lacks direct injection of gas fuel in the chamber of combustion the engine of internal combustion are shown.
Keywords: the engine of internal combustion, direct injection of gas fuel, chamber of combustion, spark ignition, algorithm, electronic control system.
Mkrtychian J.S.
New way of construction and organization of a bidirectional compressed natural gas vehicle refueling filling station
In this paper, we propose a new method of construction and organization of a bidirectional compressed natural gas vehicle refueling filling station, which differs from the known filling stations by the fact that such a station can fill cars, moving in opposite directions, without any additional expenditures, connected with the non-production runs for refilling needs.
In fact, the bidirectional compressed natural gas vehicle refueling filling station consists of a traditional 'mother' natural gas filling station, constructed on one side of the road, and a simple shed with gas dispensers on the other side of the road, which use natural gas and electricity, that is being transferred from the 'mother' station through pipelines and wires, that are laid under the road. The implementation of this invention will reduce capital expenditures, decrease operating costs, minimize construction time and the amount of support staff while creating a nationwide system of the country gas transport, as well as to reduce unproductive car runs for refueling needs.
Keywords: natural gas vehicle refueling filling station (NGV - refueling filling station), compressed natural gas (CNG).
Koklin I.M., Potapenko E.S., Shtepa V.M., Malenkina I.F.
Using of mini fuelling stations at compressor stations
The article analyzes experience of operating mini fuelling stations at compressor station "Salskaya". Authors offer to integrate mini fuelling stations at compressor stations of "Gazprom" for further re-equipment of corporate motor vehicles into NGVs and reduction of fuel costs. Authors also suggest to attract additional CNG consumers, namely vehicles of gas transport industry workers for the purpose of increasing their social security.
Keywords: Natural gas, agricultural vehicles, mini fuelling stations.
Barabanov À.À.
Safety of technological processes on the objects using of liquefied hydrocarbon gases. Problems and decisions
In given article the short analysis of maintenance of safety of technological processes on the objects using of liquefied hydrocarbon gases is resulted. Prospects of development of the equipment of an oil and gas complex are considered. The description of technological processes is given at operations of unloading and loading hydrocarbon gases, features and the basic advantages of use of electrooperated valves, its importance for safety maintenance.
Keywords: electrooperated valves, technological processes of overload SUG, plastic pipelines for SUG, technological pipelines of independent gas supply.
New technology degassing tank-wagons of the company "VIP Gas Tech"
On the new technologies and equipment for decontamination of tank-wagons of the company "VIP Gas Tech" (Moscow).
Laryushin P.D.
Certification of gas-cylinder cars, of gas-cylinder equipment and installed on vehicles
This article describes the implementation issues of concern requirements of ECE Regulation ¹ 67, 110 and 115 in the Russian Federation to the certification of gas-cylinder cars, parts and components of gas-cylinder equipment installed on vehicles. To exercise these rights in a certification system for motor vehicles and trailers in the article suggests ways and areas of work, given the technical level, the gas-cylinder equipment and the current regulatory documents in the Russian Federation.
Keywords: High-pressure reducer, compressed-gas equipment, compressed natural gas (ÑNG), UNECE Regulation ¹ 110, regulatory documents, requirements, methods (technique) tests, pressure, tightness, compatibility with the gas, safety valve.
Gajvoronsky A.I., Savenkov A.M., Markov V.A.
The Use of Dimethyl Ether for Ignition of Fuels with a Low Cetane Number in Diesel Engines
Analysis of physico-chemical properties of dimethyl ether and fuels with a low cetane number which could be used as a fuel for diesel engines is carried out in this paper. The ways of organizing diesel engine operation process when using indicated fuels are considered. Certain results of the experimental research of diesel engines running on dimethyl ether and fuels with a low cetane number are presented.
Keywords: diesel engine, diesel fuel, ethers, dimethyl ether, fuels with a low cetane number.
Ivanov A.N.
FLIT CARDS developed RFID-proposal
The article tells about a new development company FLIT CARDS with CTR Group of contactless identification and filling of vehicles with a WHO-sibility of remote service transactions in real time.
Blue Corridors Baltic region
On the International Conference "Blue Corridors Baltic region", held in late August in the city of Svetlogorsk in Kaliningrad Region and was aimed at stimulating the market development of alternative motor fuels.
Contributors to journal issue No. 6 (18) 2010
Articles published in the "Alternative Fuel Transport" Journal in 2010
